Reso 2013-2072 - Laserfiche WebLink

Home Browse Search

Subtask S.2 - Locate Test Holes: Assuming FDOT horizontal and vertical control provided, CONSULTANT shall locate individual test holes as identified in Subtask EA and provide an X, Y and Z location relative to the baseline. Test hole locations are to be used with test hole reports in verifying location of existing utilities. Services assume 125 test holes within the 2.2 mile Collins Avenue right -of -way. Engineering Services: Subtask EA - Convert FDOT file format: CONSULTANT must convert files prepared for FDOT in MicroStation to AutoCADD for use by FP &L. In doing so, CONSULTANT must manipulate and apply layer management to clean -up and prepare files for intended use. Subtask E.2 - Input Existing Utilities: The intent of this task is to locate existing features with a reasonable degree of accuracy so that proposed improvements can be designed to avoid conflict. Using test -hole information, In combination with plans, as- builts, and mark -ups from the individual utility providers, CONSULTANT shall input horizontal and vertical information into base -file for use in design plans. Once complete (existing information compiled and input) the base -file will be re- circulated to utility providers to ensure existing utilities are property represented. Minor corrections and details are expected. Subtask E.3 - Utility Test - holes: To ensure the accuracy of existing conditions, specific utilities will be physically located and identified with exact vertical and horizontal location designated. Test -hole locations shall correlate with critical crossings as determined by CONSULTANT. Because the nature of determining locations is dependent upon proposed design, the number of test -holes required is unknown. For purposes of establishing a unit price per test -hole, CONSULTANT assumes up to 125 test -holes may be required. TASK 2 - Prepare Underground Improvements Plan (30 %): Subtask EA - Prepare Underground Plan: Utilizing completed base -isle, CONSULTANT shall prepare plans for the components necessary for undergrounding of utilities. With the exception of FP &L (which will follow once design is made available) individual requirements of each utility will be identified and incorporated into proposed design. CONSULTANT- shall coordinate underground conduit needs, locations, structure sizes, and above -ground equipment. In addition, CONSULTANT shall identify proposed easements required to accommodate additional above - grade conditions. CONSULTANT assumes all underground features to be located within the existing right -of -way. KEITH and SCHNARS, P.A. ENGINEERS, PLANNERS, SURVEYORS Professional Services Agreement Project Name: lAility Undergrounding Consulting - Phase II Project Location: Sunny Isles Beach, FL K &S Proposal No.: P5098.MK Revised June 4, 2013 Page 4