Laserfiche WebLink
Features \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ <br />CDI DriveCore™ Series <br />Direct Drive 70/100Vrms Output – <br />Each output channel is capable of <br />providing either 70V or 100V for high <br />impedance applications. <br />Front-Panel Interface – Completely <br />configure the amplifier using an <br />intuitive front-panel interface. <br />GPIO/AUX Port – Recall presets, <br />mute channels, monitor faults, power <br />on/off the amplifier, and more <br />through a combined GPIO/AUX Port. <br />Pre-loaded Speaker Tunings – <br />For quicker and easier setup and <br />installation. <br />DriveCore™ Technology – Crown’s <br />proprietary DriveCore technology <br />eliminates hundreds of components <br />within each amplifier, reducing the <br />variability of component values, <br />increasing reliability, resulting in <br />incredible audio fidelity from an <br />efficient design. <br />Network Control and Monitoring – <br />Through HARMAN’s HiQnet Audio <br />Architect software, the CDi DriveCore <br />can be controlled, configured, and <br />monitored through standard TCP/IQ <br />network. <br />DSP – On-board Digital Signal <br />Processor in each amplifier allows for <br />custom configuration and includes <br />these integrated features: <br /> • Input Router <br /> • Input Delay – Up to 1000ms <br /> • Input Parametric EQ – 8 band <br /> • Crossover <br /> • Output Parametric EQ – 8 band <br /> • Output Delay – Up to 100ms <br /> • LevelMAX™ Limiter <br />BLU link (BL models only) – Both <br />receive and send channels over <br />HARMAN’s 256 channel, fault-tolerant <br />audio BUS, BLU link.