Reso 2026-4012 - Laserfiche WebLink

Home Browse Search

Garland/DBS, Inc. 3800 East 91 st Street Cleveland, OH 44105 Phone: (800) 762-8225 Fax: (216) 883-2055 ROOFING MATERIAL AND SERVICES PROPOSAL City of Sunny Isles Parking Garage 18070 Collins Ave. Sunny. Isles Beach, FL 33160 Date Submitted: 3/09/2026 Proposal #: 25-FL-250890 MICPA # PW1925 Florida General Contractor License #: CGC153367 Purchase orders to be made out to: Garland/DBS, Inc. Please Note: The following budget/estimate is being provided according to the pricing established under the Master Intergovernmental Cooperative Purchasing Agreement (MICPA) with Racine County, WI and OMNIA Partners, Public Sector (U.S. Communities). The line item pricing breakdown from Attachment C: Bid Form should be viewed as the maximum price an agency will be charged under the agreement. Garland/DBS, Inc. administered an informal competitive process for obtaining quotes for the project with the hopes of providing a lower market -adjusted price whenever possible. Scope of Work: 1. Prepare the concrete deck by removing any and all surface contaminants. Concrete surfaces must be thoroughly clean, dry and free from any surface contaminates or cleaning residue. Contractor shall employ shot-blasting and mechanical grinding followed by the complete removal of any residue. 2. Apply one coat of the specified primer by roller at the rate specified. Allow sufficient drying time. Refer to Specification. 3. Detail Work: Apply a 4" wide application of primer followed by a 23 mil detail coat of polyurea base coat at all cracks, transitions, movement joints, control joints and cove joints. 4. Base Coat: Install 32 mil application of polyurea base coat at the rate of 50 sq. ft./gal. in low humidity conditions 5. Intermediate Coat: Install 15 mil application of polyurea top coat at the rate of 110 sq. ft./gal. in low humidity conditions. 6. Apply one additional coat of intermediate coat at all ramps and radius areas. Refer to specifications. 7. Top/Finish Coat: Install 18 mil application of polyurea top coat in the desired color at the rate of 90 sq. ft./gal. in low humidity conditions (< 75% R.H.) with a notched squeegee. While coating is still wet, broadcast 16/30 rounded sand aggregate uniformly into wet coating with a seed . spreader at a rate of 15-20 lbs./l00 sq. ft. 8. Applicator must use care and adjust coverage rates coats as required. for a smooth and uniform look. Some substrates require additional coats at lower application rates. 9. Replace 3 expansion joints using like kind wing joint and following specifications. 10. Reinstall parking lines and signage using approved acrylic paint. Page 1 of 3