Laserfiche WebLink
SAMSON OCEANFRONT PARK <br />CITY OF SUNNY ISLES <br />TECHNICAL SPECIFICATIONS <br /> <br /> PLUMBING PIPING INSULATION 15085-4 <br /> <br /> <br /> <br />1. Materials shall be compatible with insulation materials, jackets, and substrates. <br />2. Fire- and water-resistant, flexible, elastomeric sealant. <br />3. Service Temperature Range: Minus 40 to plus 250 deg F <br />4. Color: White. <br />. <br />5. For indoor applications, sealants shall have a VOC content of 420 g/L or less when calculated <br /> according to 40 CFR 59, Subpart D (EPA Method 24). <br />6. Sealants shall comply with the testing and product requirements of the California Department <br /> of Health Services' "Standard Practice for the Testing of Volatile Organic Emissions from <br /> Various Sources Using Small-Scale Environmental Chambers." <br /> <br />2.06 <br /> <br />FACTORY-APPLIED JACKETS: <br />A. Insulation system schedules indicate factory-applied jackets on various applications. When <br /> factory-applied jackets are indicated, comply with the following: <br />1. ASJ: White, kraft-paper, fiberglass-reinforced scrim with aluminum-foil backing; complying <br /> with ASTM C 1136, Type I. <br />2. ASJ-SSL: ASJ with self-sealing, pressure-sensitive, acrylic-based adhesive covered by a <br /> removable protective strip; complying with ASTM C 1136, Type I. <br />3. FSK Jacket: Aluminum-foil, fiberglass-reinforced scrim with kraft-paper backing; complying <br /> with ASTM C 1136, Type II. <br /> <br />2.07 <br /> <br />FIELD-APPLIED FABRIC-REINFORCING MESH: <br />A. Woven Polyester Fabric: Approximately 1 oz./sq. yd. with a thread count of 10 strands by 10 <br /> strands/sq. in. <br /> <br />, in a Leno weave, for pipe. <br />2.08 <br /> <br />FIELD-APPLIED JACKETS: <br />A. Field-applied jackets shall comply with ASTM C 921, Type I, unless otherwise indicated. <br /> <br />B. PVC Jacket: High-impact-resistant, UV-resistant PVC complying with ASTM D 1784, <br /> Class 16354-C; thickness as scheduled; roll stock ready for shop or field cutting and forming. <br /> Thickness is indicated in field-applied jacket schedules. <br />1. Adhesive: As recommended by jacket material manufacturer. <br />2. Color: White Factory-fabricated fitting covers to match jacket if available; otherwise, field <br /> fabricate. <br />a. Shapes: 45- and 90-degree, short- and long-radius elbows, tees, valves, flanges, unions, <br />reducers, end caps, soil-pipe hubs, traps, mechanical joints, and P-trap and supply covers <br />for lavatories. <br /> <br />2.09 <br /> <br />TAPES: <br />A. ASJ Tape: White vapor-retarder tape matching factory-applied jacket with acrylic adhesive, <br /> complying with ASTM C 1136. <br />1. Width: 3 inches <br />2. Thickness: <br />. <br />11.5 mils <br />3. Adhesion: <br />. <br />90 ounces force/inch <br />4. Elongation: 2 percent. <br /> in width. <br />5. Tensile Strength: 40 lbf/inch <br />6. ASJ Tape Disks and Squares: Precut disks or squares of ASJ tape. <br /> in width. <br /> <br />B. FSK Tape: Foil-face, vapor-retarder tape matching factory-applied jacket with acrylic adhesive; <br /> complying with ASTM C 1136. <br />1. Width: 3 inches <br />2. Thickness: <br />. <br />6.5 mils.