Laserfiche WebLink
SAMSON OCEANFRONT PARK <br />CITY OF SUNNY ISLES <br />TECHNICAL SPECIFICATIONS <br /> <br />SANITARY WASTE AND VENT PIPING 15150-2 <br /> <br /> <br /> <br />2. Description: Stainless-steel shield with stainless-steel bands and tightening devices; and <br />ASTM C 564, rubber sleeve with integral, center pipe stop. <br />2.04 <br />A. Copper DWV Tube: ASTM B 306, drainage tube, drawn temper. <br />COPPER TUBE AND FITTINGS: <br />B. Copper Drainage Fittings: ASME B16.23, cast copper or ASME B16.29, wrought copper, solder-joint <br />fittings. <br />C. Copper Flanges: ASME B16.24, Class 150, cast copper with solder-joint end. <br />1. Flange Gasket Materials: ASME B16.21, full-face, flat, nonmetallic, asbestos-free, 1/8-inch <br />2. Flange Bolts and Nuts: ASME B18.2.1, carbon steel unless otherwise indicated. <br /> <br />maximum thickness unless thickness or specific material is indicated. <br />D. Solder: ASTM B 32, lead free with ASTM B 813, water-flushable flux. <br />2.05 <br />A. Solid-Wall PVC Pipe: ASTM D 2665, drain, waste, and vent. <br />PVC PIPE AND FITTINGS: <br />B. PVC Socket Fittings: ASTM D 2665, made to ASTM D 3311, drain, waste, and vent patterns and to fit <br />Schedule 40 pipe. <br />C. Adhesive Primer: ASTM F 656. <br />1. Adhesive primer shall have a VOC content of 550 g/L or less when calculated according to <br />40 CFR 59, Subpart D (EPA Method 24). <br />2. Adhesive primer shall comply with the testing and product requirements of the California <br />Department of Health Services’ “Standard Practice for the Testing of Volatile Organic Emissions <br />from Various Sources Using Small-Scale Environmental Chambers.” <br />D. Solvent Cement: ASTM D 2564. <br />1. PVC solvent cement shall have a VOC content of 510 g/L or less when calculated according to <br />40 CFR 59, Subpart D (EPA Method 24). <br />2. Solvent cement shall comply with the testing and product requirements of the California <br />Department of Health Services’ “Standard Practice for the Testing of Volatile Organic Emissions <br />from Various Sources Using Small-Scale Environmental Chambers.” <br />2.06 <br />A. Transition Couplings: <br />SPECIALTY PIPE FITTINGS: <br />1. General Requirements: Fitting or device for joining piping with small differences in OD's or of <br />different materials. Include end connections same size as and compatible with pipes to be joined. <br />2. Fitting-Type Transition Couplings: Manufactured piping coupling or specified piping system <br />fitting. <br />3. Unshielded, Nonpressure Transition Couplings: <br />a. Standard: ASTM C 1173.