Laserfiche WebLink
SAMSON OCEANFRONT PARK <br />CITY OF SUNNY ISLES <br />TECHNICAL SPECIFICATIONS <br />WIRING DEVICES 16140 - 3 <br />3. Fluorescent Lamp Dimmers: Modular; compatible with dimmer ballasts; trim poten <br /> tiometer to adjust low-end dimming; dimmer-ballast combination capable of consis <br /> tent dimming to a maximum of 1 percent of full brightness. <br /> <br />2.6 <br /> <br />WALL PLATES <br />A. Single and combination types match corresponding wiring devices. <br />1. Plate-Securing Screws: Metal with head color to match plate finish. <br />2. Material for Finished Spaces: Smooth nylon, white color. <br />3. Material for Unfinished Spaces: Galvanized steel. <br /> <br />2.7 <br />A. Type: Modular, flush-type, dual-service units suitable for wiring method used. <br />FLOOR SERVICE FITTINGS <br />B. Compartmentation: Barrier separates power and signal compartments. <br />C. Housing Material: Die-cast aluminum, body with brass cover plate and carpet flange. <br />D. Power Receptacle: NEMA WD 6, Configuration 5-20R, white finish, unless otherwise <br /> indicated. <br />E. Signal Outlet: Blank cover with bushed cable opening, unless otherwise indicated. <br /> <br />2.8 <br />A. Description: Factory-fabricated and -wired assembly of below-floor junction box unit with <br />multichanneled, through-floor raceway/firestop unit and detachable matching floor ser- <br />vice-outlet assembly. <br />POKE-THROUGH ASSEMBLIES <br />1. Size: Selected to fit nominal 3-inch cored holes in floor and matched to floor <br /> thickness. <br />2. Fire Rating: Unit is listed and labeled for fire rating of floor-ceiling assembly. <br />3. Closure Plug: Arranged to close unused 3-inch cored openings and reestablish fire <br /> rating of floor. <br /> <br />2.9 <br /> <br />TELEPHONE/POWER SERVICE POLES <br />A. Description: Factory-assembled and -wired units to extend power, telephone, and data <br />service from distribution wiring concealed in ceiling to devices or outlets in pole near <br />floor. <br />1. Poles: Nominal 2.5-inch-square cross section with height adequate to extend from <br /> floor to at least 6 inches above ceiling, and separate channels for power and signal <br /> wiring. <br />2. Mounting: Ceiling trim flange with concealed bracing arranged for positive <br /> connection to ceiling supports, and pole foot with carpet pad attachment. <br />3. Finishes: One of manufacturers standard finish and trim combinations, including <br /> painted and satin anodized-aluminum finishes and wood-grain-type trim. <br />4. Power Receptacles: Two single; 20-A; heavy-duty; NEMA WD 6, Configuration 5- <br /> 20R units. <br />5. Signal Outlets: Blank insert with bushed cable opening. <br /> <br />2.10 FINISHES