Reso 2007-1103 - Laserfiche WebLink

Home Browse Search

M 337 -9.3.2 Blending Quality Control Records: Maintain adequate Quality Control records for the Engineer's review for all pretreatment activities. Include as a minimum the following information (for each batch or day's run of pretreatment): pretreatment date, aggregate certification information, certified test results for the hydrated lime, aggregate moisture content prior to blending, as- blended quantities of aggregate and hydrated lime, project number, customer name, and shipping date. 337 -9.3.3 Certification: In addition to the aggregate certification, provide a certification with each load of material delivered to the HMA plant, that the material has been pretreated in conformance with these specifications. Include also the date the j material was pretreated. I [11�� 337 -10 Failing Material. Meet the requirements of 334 -5.9. For FC -5, use the Master Production Range defined in Table 337 -2 in lieu of Table 334 -4. 337 -11 Method of Measurement. For the work specified under this Section (including the pertinent provisions of Sections 320 and 330), the quantity to be paid for will be the weight of the mixture, in tons [metric tons]. The pay quantity will be based on the average spread rate for the project, limited to a maximum of 105% of the spread rate set by the Engineer in accordance with 337 -8. The bid price for the asphalt mix will include the cost of the asphalt binder (asphalt rubber (or polymer), asphalt cement, ground tire rubber, anti - stripping agent, blending and handling) and the tack coat application as directed in 300 -8, as well as fiber stabilizing additive and hydrated lime (if required). There will be no separate payment or unit price adjustment for the asphalt binder material in the asphalt mix. The weight will be determined as provided in 320 -2 (including the provisions for the automatic recordation system). Prepare a Certification of Quantities, using the Department's current approved form, for the certified asphalt concrete friction course pay item. Submit this certification to the Engineer no later than Twelve O'clock noon Monday after the estimate cut -off or as directed by the Engineer, based on the quantity of asphalt produced and accepted on the Contract. The certification must include the Contract Number, FPID Number, Certification Number, Certification Date, period represented by Certification and the tons [metric tons] produced for each asphalt pay item. 337 -12 Basis of Payment. 337 -12.1 General: Price and payment will be full compensation for all the work specified under this Section (including the applicable requirements of Sections 320 and 330). Based upon the quality of the material, a pay adjustment will be applied to the bid price of the material as determined on a LOT by LOT basis. The pay adjustment will be assessed by calculating a Pay Factor for individual quality characteristics. The pay adjustment will be computed by multiplying a Composite Pay Factor for the LOT by the bid price per ton [metric ton]. Perform all calculations with the Department's Asphalt Plant - Pay Factor Worksheets (Form No. 675 - 030 -22). 337 -12.2 FC -9.5 and FC -12.5: Meet the requirements of 334 -8. 337 -12.3 FC -5: Meet the requirements of 334 -8 with the following exceptions: March 2007 01000 -79 03- 4122.D