Laserfiche WebLink
SECTION 02613 <br />CORRUGATED METAL DRAINAGE PIPE <br />PART 1- GENERAL <br />1.01 WORK INCLUDED <br />A. Furnish labor, materials, equipment, and incidentals required to install the <br />corrugated metal pipe including pipe, foundation, joint couplers and fittings as <br />shown on the drawings. <br />1.02 RELATED SECTIONS <br />A. Section 03300: Cast -In -Place Concrete <br />1.03 SYSTEM DESCRIPTION <br />A. Corrugated metal pipes will be utilized to interconnect the ditch at the designated <br />area on the plans. See details on plans. <br />1.04 SUBMITTALS <br />A. Submit shop drawings to Engineer for approval. <br />B. Shop drawings to show layout of entire trench system designating component <br />parts and accessories. <br />1.05 INSPECTION <br />A. The quality of the finished pipe shall be subject to inspection and approval by the <br />Engineer, or other representative of the Owner. Pipe rejected after delivery shall <br />be marked for identification and shall be removed from the job at once. <br />B. The manufacturer shall inspect all pipe joints for out -of- roundness and pipe ends <br />for squareness. The manufacturer shall furnish to the Engineer a notarized <br />affidavit stating all pipe meets the requirements of AASHTO M -196, these <br />Specifications, and the joint design with respect to square ends and out -of -round <br />joint surfaces. <br />PART 2- PRODUCTS <br />2.01 ACCEPTABLE MANUFACTURERS <br />A. Kaiser Aluminum, Inc. <br />B. Gator Culvert Co. 865 N. Dixie Highway, Lantana, Fl. 33465 <br />C. Contech Construction Products, Inc., P.O. Box 800, Middletown, OH, 45042. <br />05/08 02613 -1 05 -4893 <br />