Laserfiche WebLink
<br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br /> <br />SECTION 02613 <br /> <br />CORRUGATED METAL DRAINAGE PIPE <br /> <br />PART i-GENERAL <br /> <br />1.01 WORK INCLUDED <br /> <br />A. Furnish labor, materials, equipment, and incidentals required to install the <br />corrugated metal pipe including pipe, foundation, joint couplers and fittings as <br />shown on the drawings. <br /> <br />1.02 RELATED SECTIONS <br /> <br />A. Section 03300: Cast-in-Place Concrete <br /> <br />1.03 SYSTEM DESCRIPTION <br /> <br />A. Corrugated metal pipes will be utilized to interconnect the ditch at the designated <br />area on the plans. See details on plans. <br /> <br />1.04 SUBMITTALS <br /> <br />A. Submit shop drawings to Engineer for approval. <br /> <br />B. Shop drawings to show layout of entire trench system designating component <br />parts and accessories. <br /> <br />1.05 INSPECTION <br /> <br />A. The quality of the finished pipe shall be subject to inspection and approval by the <br />Engineer, or other representative of the Owner. Pipe rejected after delivery shall <br />be marked for identification and shall be removed from the job at once. <br /> <br />B. The manufacturer shall inspect all pipe joints for out-of-roundness and pipe ends <br />for squareness. The manufacturer shall furnish to the Engineer a notarized <br />affidavit stating all pipe meets the requirements of AASHTO M-196, these <br />Specifications, and the joint design with respect to square ends and out-of-round <br />joint surfaces. <br /> <br />PART 2-PRODUCTS <br /> <br />2.01 ACCEPTABLE MANUFACTURERS <br /> <br />A. Kaiser Aluminum, Inc. <br /> <br />B. Gator Culvert Co. 865 N. Dixie Highway, Lantana, FI. 33465 <br /> <br />C. Contech Construction Products, Inc., P.O. Box 800, Middletown, OH, 45042. <br /> <br />06/07 <br /> <br />02613-1 <br /> <br />03-4197 <br />