Laserfiche WebLink
<br />Copyright 2002 AIA <br /> <br />MASTERSPEC Full Length <br /> <br />11/02 (R 05/06) <br /> <br />SECTION 01731 - CUTTING AND PATCHING <br /> <br />PART 1 - GENERAL <br /> <br />1.1 RELATED DOCUMENTS <br /> <br />A. Drawings and general provisions of the Contract, including General and Supplementary <br />Conditions and other Division 1 Specification Sections, apply to this Section. <br /> <br />1.2 SUMMARY <br /> <br />A. This Section includes procedural requirements for cutting and patching. <br /> <br />B. Related Sections include the following: <br /> <br />1. Division 1 Section "Selective Demolition" for demolition of selected portions of the <br />building. <br />2. Divisions 2 through 16 Sections for specific requirements and limitations applicable to <br />cutting and patching individual parts of the Work. <br />3. Division 7 Section "Through-Penetration Firestop Systems" for patching fITe-rated <br />construction. <br /> <br />1.3 DEFINITIONS <br /> <br />A. Cutting: Removal of in-place construction necessary to permit installation or performance of <br />other Work. <br /> <br />B. Patching: Fitting and repair work required to restore surfaces to original conditions after <br />installation of other Work. <br /> <br />1.4 SUBMITTALS <br /> <br />A. Cutting and Patching Proposal: Submit a proposal describing procedures at least 10 days before <br />the time cutting and patching will be performed, requesting approval to proceed. Include the <br />following information: <br /> <br />1. Extent: Describe cutting and patching, show how they will be performed, and indicate <br />why they cannot be avoided. <br />2. Changes to In-Place Construction: Describe anticipated results. Include changes to <br />structural elements and operating components as well as changes in building's appearance <br />and other significant visual elements. <br />3. Products: List products to be used and fIrms or entities that will perform the Work. <br />4. Dates: Indicate when cutting and patching will be performed. <br />5. Utility Services and MechanicallElectrical Systems: List services/systems that cutting <br />and patching procedures will disturb or affect. List services/systems that will be <br /> <br />CUTTING AND PATCHING <br /> <br />01731-1 <br />