Laserfiche WebLink
<br />Copyright 2002 AIA <br /> <br />MASTERSPEC <br /> <br />11/02 <br /> <br />1. Touch up and otherwise repair and restore marred, exposed fInishes and surfaces. <br />Replace fInishes and surfaces that cannot be satisfactorily repaired or restored or <br />that already show evidence of repair or restoration. <br /> <br />I) Do not paint over "UL" and similar labels, including mechanical and <br />electrical nameplates. <br /> <br />m. Wipe surfaces of mechanical and electrical equipment, and similar equipment. <br />Remove excess lubrication, paint and mortar droppings, and other foreign <br />substances. <br />n. Replace parts subject to unusual operating conditions. <br />o. Clean plumbing fixtures to a sanitary condition, free of stains, including stains <br />resulting from water exposure. <br />p. Replace disposable air filters and clean permanent air filters. Clean exposed <br />surfaces of diffusers, registers, and grills. <br />q. Clean ducts, blowers, and coils if units were operated without filters during <br />construction. <br />r. Clean light fIxtures, lamps, globes, and reflectors to function with full efficiency. <br />Replace burned-out bulbs, and those noticeably dimmed by hours of use, and <br />defective and noisy starters in fluorescent and mercury vapor fixtures to comply <br />with requirements for new fixtures. <br />s. Leave Project clean and ready for occupancy. <br /> <br />C. Pest Control: Engage an experienced, licensed exterminator to make a final inspection and rid <br />Project of rodents, insects, and other pests. Prepare a report. <br /> <br />D. Comply with safety standards for cleaning. Do not burn waste materials. Do not bury debris or <br />excess materials on Owner's property. Do not discharge volatile, harmful, or dangerous <br />materials into drainage systems. Remove waste materials from Project site and dispose of <br />lawfully. <br /> <br />END OF SECTION 01770 <br /> <br />CLOSEOUTPROCEDVRES <br /> <br />01770 - 5 <br />