Laserfiche WebLink
<br />Copyright 2002 AIA <br /> <br />MASTERSPEC - SHORT FORM <br /> <br />05/02 <br /> <br />1. Moisture Curing: Keep surfaces continuously moist for not less than 7 days with [water] <br />[continuous water-fog spray] [or] [ahsorptive cover, water saturated and kept <br />continuously wet. Cover topping surfaces and edges with 12-ineh (300-mm) lap over <br />adjacent ahsorptive covers]. <br />2. Moisture-Retaining-Cover Curing: Cover concrete surfaces with moisture-retaining <br />cover for curing concrete, placed in widest practicable width, with sides and ends lapped <br />at least 12 inches (300 mm), and sealed by waterproof tape or adhesive. Cure for not less <br />than seven days. Immediately repair any holes or tears during curing period using cover <br />material and waterproof tape. <br />3. Curing Compound: Apply uniformly in two coats in continuous operations by power <br />spray or roller according to manufacturer's written instructions. Recoat areas subjected to <br />heavy rainfall within three hours after initial application. Maintain continuity of coating <br />and repair damage during curing period. <br /> <br />3.4 REPAIRS <br /> <br />A. Defective Topping: Repair and patch defective concrete floor topping areas, including areas <br />that have not bonded to concrete substrate. <br /> <br />END OF SECTION 03532 <br /> <br />CONCRETE FLOOR TOPPING <br /> <br />03532 - 5 <br />