Laserfiche WebLink
<br />Copyright 2004 AIA <br /> <br />MASTERSPEC - SHORT FORM <br /> <br />02/04 <br /> <br />d. Euclid Chemical Company (The); [Euco #352 Epoxy System] [Euco #452 Epoxy <br />System] [ or] [Eueo #620 Epoxy System]. <br />e. Kaufman Products, Inc.; SurePoxy HM EPL. <br />f. MBT Protection and Repair, Div. of ChemRex; Concresive Liquid LPL. <br />g. Meadows, W. R., Inc.; [Sealtight Rezi-Weld 1000] [Sealtight Rezi-Weld Gel <br />Paste] [Sealtight Rezi-Weld Gel Paste State] [or] [Sealtight Rezi-Weld LV]. <br />h. Sika Corporation; [Sikadur 31, Hi-Mod Gel] [Sikadur 32, Hi-Mod] <br />[Sikadur 32, Hi-Mod LPL] [Sikadur 35, Hi-Mod LV] [or] [Sikadur 35, Hi- <br />Mod LV LPL]. <br />1. Sonneborn, Div. ofChemRex; [Epogel] [or] [Epogrip]. <br />J. Tamms Industries, Inc.; Duralbond. <br />k. ThoRoc, Div. of ChemRex; Epoxy Adhesive 24LPL. <br />I. Unitex; [Pro-Poxy 204] [or] [Slow Set Bonding Agent]. <br />m. US MIX Products Company; [US Spec Maxi - Bond 2500] [or] [US Spec Slow <br />Bond 6500]. <br />n. <Insert manufacturer's name; product name or designation.> <br /> <br />3. Thin Film Open Time: Not less than [two] [six] [24] hours. <br /> <br />C. Latex Bonding Agent: ASTM C 1059, Type [I] [II] [II at exterior locations and where <br />indicated, Type I at other locations]. <br /> <br />1. Available Products: Subject to compliance with requirements, products that may be <br />incorporated into the Work include, but are not limited to, the following: <br />2. Products: Subject to compliance with requirements, provide one of the following: <br /> <br />a. Latex Bonding Agent, Type I: <br /> <br />1) Euclid Chemical Company (The); Euco Weld. <br />2) Kaufman Products, Inc.; Sureweld. <br />3) Meadows, W. R. Inc.; Intralok. <br />4) Sika Corporation; Sikalatex. <br />5) US MIX Products Company; US Spec Bondcoat. <br />6) <Insert manufacturer's name; product name or designation.> <br /> <br />b. Latex Bonding Agent, Type II: <br /> <br />1) Dayton Superior Corporation; Day-Chem Ad Bond (J-40). <br />2) Euclid Chemical Company (The); Flex-Con. <br />3) Kaufman Products, Inc.; Surebond. <br />4) Meadows, W. R. Inc.; Sealtight Acry-Lok. <br />5) Sonneborn, Div. of ChemRex; Acrylic Additive. <br />6) US MIX Products Company; US Spec Acrylcoat. <br />7) <Insert manufacturer's name; product name or designation.> <br /> <br />2.2 PATCHING MORTAR <br /> <br />A. Patching Mortar, General: <br /> <br />1. Unless otherwise indicated, use any of the products specified in this Article. <br /> <br />CONCRETE REHABILITATION <br /> <br />03930 - 3 <br />