Laserfiche WebLink
<br />Copyright 2004 AIA <br /> <br />MASTERSPEC - SHORT FORM <br /> <br />02/04 <br /> <br />B. Steel and Fiber Reinforcement and Reinforcement Accessories: Comply with Division 3 <br />Section "[Cast-in-Placf Concrete] [Cast-in-Place Concrete (Limited Applications)]." <br /> <br />C. Form-Facing Materials: Comply with Division 3 Section "[Cast-in-Place Concrete] [Cast-in- <br />Place Concrete (Limih:d Applications)]." <br /> <br />2.4 MISCELLANEOUS MATERIALS <br /> <br />A. Epoxy Joint Filler: 2-Gomponent, semirigid, 100 percent solids, epoxy resin with a Type A <br />Shore durometer hardness of at least 80 per ASTM D 2240. <br /> <br />1. Available Products: Subject to compliance with requirements, products that may be <br />incorporated into the Work include, but are not limited to, the following: <br />2. Products: Subject to compliance with requirements, provide one of the following: <br /> <br />a. Anti-Hydro International, Inc.; Groove & Crack Filler #250. <br />b. ChemCo Systems; CCS Grout, [Control Joint] [or] [Control Joint - DB]. <br />c. Euclid Chemical Company (The); Euco [700] [ or] [800]. <br />d. Kaufman Products, Inc.; Surepoxy Flexijoint. <br />e. MBT Protection and Repair, Div. ofChemRex; Masterfi1l300i. <br />f. Meadows, W. R., Inc.; Sealtight Rezi-Weld Flex. <br />g. Metzger/McGuire; [MM-80] [or] [Edge-Pro XL]. <br />h. Sika Corporation; [Sikadur 51 NS] [ or] [Sikadur 51 SL]. <br />1. Unitex; [pI'o-Flex] [or] [pro-Flex Gel]. <br />J. US Mix Products Company; US Spec SR 50 - EJF. <br />k. <Insert mnnufacturer's name; product name or designation.> <br /> <br />B. Polyurea Joint Filler: 2..component, semirigid, 100 percent solids, polyurea resin with a Type A <br />Shore durometer hardness of at least 80 per ASTM D 2240. <br /> <br />1. Available Products: Subject to compliance with requirements, products that may be <br />incorporated into the Work include, but are not limited to, the following: <br />2. Products: Subject to compliance with requirements, provide one of the following: <br /> <br />a. ASTC Polymers; Penetron 3003. <br />b. ChemCo Systems; CCS Grout, Polyurea [Control Joint] [or] [SWL]. <br />c. Dayton Superior Corporation; Joint Saver II. <br />d. Euclid Chemical Company (The); Euco Qwilgoint 200. <br />e. MBT Protection and Repair, Div. ofChemRex; Masterfi1l400 CT. <br />f. Metzger/McGuire; [Spal-Pro RS 88] [or] [Spal-Pro 2000]. <br />g. Sonneborn" Div. ofChemRex; Sonolastic TF-100. <br />h. <Insert mnnufacturer's name; product name or designation.> <br /> <br />C. Epoxy Crack Injection Adhesive: ASTM C 881/C 881M, Type [I,] [IV,] [Grade I,] [except <br />for gel time,] [solvent free]. <br /> <br />1. Available Products: Subject to compliance with requirements, products that may be <br />incorporated into the Work include, but are not limited to, the following: <br />2. Products: Subject to compliance with requirements, provide one of the following: <br /> <br />CONCRETE REHABILITATION <br /> <br />03930 - 6 <br />