Laserfiche WebLink
SAMSON OCEANFRONT PARK <br />CITY OF SUNNY ISLES <br />TECHNICAL SPECIFICATIONS <br />LIGHTING CONTROL DEVICES 16145 - 5 <br />1. Current Rating for Switching: UL listing or rating consistent with type of load <br />served, including tungsten filament, inductive, and high-inrush ballast (ballasts with 15 <br />percent or less total harmonic distortion of normal load current). <br />2. Control Coil Voltage: Match control power source. <br /> <br />PART 3 - EXECUTION <br />3.1 <br />A. Install equipment level and plumb and according to manufacturer's written instructions. <br />INSTALLATION <br /> <br />B. Mount lighting control devices according to manufacturer's written instructions and <br /> requirements in Division 16 Section "Basic Electrical Materials and Methods." <br />C. Mounting heights indicated are to bottom of unit for suspended devices and to center of <br /> unit for wall-mounting devices. <br />3.2 <br />A. Install wiring between sensing and control devices according to manufacturer's written <br /> instructions and as specified in Division 16 Section "Conductors and Cables" for low- <br /> voltage connections and Division 16 Section "Voice and Data Systems" for digital cir <br /> cuits. <br />CONTROL WIRING INSTALLATION <br />B. Wiring Method: Install all wiring in raceway as specified in Division 16 Section "Race <br /> ways and Boxes." <br />C. Wiring Method: Install all wiring in raceway as specified in Division 16 Section "Race <br /> ways and Boxes," unless run in accessible ceiling space and gypsum board partitions. <br />D. Bundle, train, and support wiring in enclosures. <br />E. Ground equipment. <br />F. Connections: Tighten electrical connectors and terminals according to manufacturer's <br /> published torque-tightening values. If manufacturer's torque values are not indicated, use <br /> those specified in UL 486A. <br />3.3 <br />A. Identify components and power and control wiring according to Division 16 Section "Ba <br /> sic Electrical Materials and Methods." <br />IDENTIFICATION <br />B. Identify components and power and control wiring according to Division 16 Section <br /> "Electrical Identification." <br />3.4 FIELD QUALITY CONTROL