Laserfiche WebLink
SAMSON OCEANFRONT PARK <br />CITY OF SUNNY ISLES <br />TECHNICAL SPECIFICATIONS <br />PANELBOARDS 16442 - 2 <br />1.4 <br />A. Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70, <br />Article 100, by a testing agency acceptable to authorities having jurisdiction, and marked for in- <br />tended use. <br />QUALITY ASSURANCE <br />B. Comply with NEMA PB 1. <br />C. Comply with NFPA 70. <br />1.5 <br />A. Coordinate layout and installation of panelboards and components with other construction that <br />penetrates walls or is supported by them, including electrical and other types of equipment, <br />raceways, piping, and encumbrances to workspace clearance requirements. <br />COORDINATION <br />PART 2 - PRODUCTS <br />2.1 <br />A. Manufacturers: Subject to compliance with requirements, provide products by one of the fol- <br />lowing: <br />MANUFACTURERS <br />1. Panelboards, Overcurrent Protective Devices, Controllers, Contactors, and Accessories: <br />a. Cutler-Hammer Products. <br />b. General Electric Co. <br />c. Siemens Energy & Automation, Inc. <br />d. Square D Co. <br />2.2 <br />A. Enclosures: Flush- or surface-mounted cabinets as indicated on the electrical drawings. <br />NEMA PB 1, Type 1, to meet environmental conditions at installed location. <br />FABRICATION AND FEATURES <br />1. Outdoor Locations: NEMA 250, Type 3R. <br />B. Front: Secured to box with concealed trim clamps. For surface-mounted fronts, match <br />box dimensions; for flush-mounted fronts, overlap box. <br />C. Hinged Front Cover: Front trim bolted to box with standard door within hinged trim cover. <br />D. Finish: Manufacturer's standard enamel finish over corrosion-resistant treatment or pri- <br />mer coat. <br />E. Directory Card: With transparent protective cover, mounted inside metal frame, inside <br />panelboard door.