Attachment A - 2015-3-13_Samson Park Technical Specifications

Home Browse Search

MDWASD 1/1999 15010 - 3 R-1 1.10 METAL FASTENERS: Unless otherwise indicated, metal fasteners and related parts shall be of aluminum or stainless steel and shall be of adequate strength for the purpose intended. 1.11 PREVENTION OF ELECTROLYSIS: W here the contact of dissimilar metals may cause electrolysis and where aluminum will contact concrete, mortar or plaster, the contact surface of the metals shall be separated using not less than one coat of zinc chromate primer and one heavy coat of aluminum pigmented asphalt paint on each surface; or where deemed necessary by the Engineer of Record, not less than one course of asphalt saturated cotton fabric cemented to both metals with flashing cement, shall be used. Finished works shall be cleaned and excess cement removed. 1.12 FACTORY TESTS: W hen equipment is required to be factory tested, the results of the tests shall be submitted to the Engineer of Record and approval of the test results shall be obtained before shipment of the equipment. 1.13 CLEANING AND ADJUSTMENTS: Upon completion of work, the Contractor shall clean, oil and grease fans, motors compressors, pumps, and other running equipment and apparatus and mechanisms which he installs and shall make certain such apparatus and mechanisms are in proper working order and ready for test. 1.14 W ARRANTY AND MAINTENANCE BOND: The Developer shall warrant that all work, materials, equipment or facility shall be free from defects for a period of one year from the date of the final acceptance, that all the equipment has the capacity specified and that it will operate without excess noise or vibration caused by improper installation. In addition, the Developer shall provide the County with a Maintenance Bond in accordance with its agreement with the County. PART 2 - PRODUCTS (Not Used) PART 3 - EXECUTION (Not Used) END OF SECTION