Attachment A - 2015-3-13_Samson Park Technical Specifications

Home Browse Search

7/2011 15060 - 13 e. Nominal laid length of Type PSM SDR-35 PVC sewer pipe shall be 13 feet. f. Type PSM SDR-35 PVC sewer pipe shall be double labeled (180 degrees apart) as fol- lows at intervals of five (5) feet or less: Date of manufacture - Manufacturer's name & Code - Nominal size - Cell classification - "Type PSM SDR-35 PVC Sewer Pipe" - "Specification D 3034" 2. Type PSM SDR-35 PVC Sewer Fittings a. Type PSM SDR-35 PVC Sewer Fittings shall conform to ASTM Standard D 3034 and to the specifications for Type PSM SDR-35 PVC sewer pipe herein, except as modified below. b. The waterway and bell wall thickness shall be equal to or greater than that spe- cified for pipe, except that for reducing fittings or those with smaller inlets, the wall thickness of each inlet shall be no less than the minimum wall thickness for that size pipe. B. AWWA C900 AND C905 PVC (CI) PIPE AND FITTINGS 1. TYPE C900 and C905 PVC PIPE AWWA C900 and C905 PVC (CI) Pipe for sewer mains and laterals shall conform re- spectively to ANSI/AWWA C900, "Polyvinyl Chloride (PVC) Pressure Pipe and Fabri- cated Fittings, 4 In. Through 12 In., for Water Transmission and Distribution", and AN- SI/AWWA C905, “Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings 14 In. Through 48 In.” except as otherwise modified herein. a. The dimensions and pressure classes shall be for Dimension Ratios 14, 18 and 25 (DR’s 14, 18 and 25) for C900 PVC pipe and DR’s of 14,18, 21,25, 26, 32.5, 41 and 51 for C905 PVC Pipe with equivalent cast iron pipe outside diameters. b. AWWA C900 and C905 pipe shall be made from PVC thermoplastic having physical and chemical properties which meet or exceed a cell classification of 12454-A or 12454-B virgin compounds as defined in ASTM Standard D 1784. c. The AWWA C900 and C905 pipe shall be push-on type, with bells, spigots and elasto- meric gaskets in accordance with ASTM Standard D 3139, "Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals". The gaskets shall conform to ASTM Standard F477 and shall be synthetic rubber. One gasket shall be furnished with each length of elastomeric-gasket bell-end pipe. Pipe spigots shall be beveled. Pipe bells shall be extruded integral with the pipe barrel with a thickness equal to or greater than that of the barrel. d. Nominal laid length of AWWA C900 and C905 PVC (CI) pipe shall be 20 feet. e. The C900 and C905 pipe shall be labeled with the following at intervals of not more than five (5) feet: