Section 01300 Submittals - Laserfiche WebLink

Home Browse Search

01300 - 4/9 C. Transmittal of Compliance Submittals: 1. All Compliance Submittals of Equipment and Materials furnished by Subcontractors, Manufacturers, and Suppliers shall be submitted to the City by Contractor. 2. After checking and verifying all field measurements, transmit all Compliance Submittals to the City for acceptance as follows: a. Identify each Compliance Submittal by Submittal Number, Project name and number, Contract title and number, and the Specification Section and article number marked thereon or in the letter of transmittal. Unidentifiable Submittals will be returned for proper identification. b. Check and stamp Compliance Submittals of Subcontractors, Suppliers, and Manufacturers with Contractor's approval prior to transmitting them to the City. Contractor's stamp of approval shall constitute a representation to the City that Contractor has either determined and verified all quantities, dimensions, field construction criteria, materials, catalog numbers, and similar data, or he assumes full responsibility for doing so, and that he has coordinated each Compliance Submittal with the requirements of the Work and the Contract Documents. c. At the time of each submission, call to the attention of City in the letter of transmittal any deviations from the requirements of the Contract Documents. d. Make all modifications noted or indicated by City and return revised prints, copies, or samples until accepted. Direct specific attention in writing, or on revised Submittals, to changes other than the modifications called for by the City on previous Submittals. After Submittals have been accepted, submit copies thereof for final distribution. Prints of accepted drawings transmitted for final distribution will not be further reviewed and are not to be revised. If errors are discovered during manufacture or fabrication, correct the Submittal and resubmit for review. e. Following completion of the Work and prior to final payment, furnish those Drawings necessary to indicate "as constructed" conditions, including field modifications, in the number of copies specified. Furnish additional copies for insertion in equipment instruction books as required. All such copies shall be clearly marked "AS CONSTRUCTED." f. Work requiring a Compliance Submittal shall not be commenced or shipped until the Submittal has been stamped "Submittal Accepted" or "Submittal Acceptable as Noted" by the City. g. Keep a copy or sample of each Compliance Submittal in good order at the site. 3. Quantity Requirements: a. Except as otherwise specified, transmit all manufacturer's or fabricator's Shop Drawings in the quantity as follows: i. Initial Submittal: Seven copies including one reproducible to City. Two copies will be returned to Contractor. ii. Resubmittals: Seven copies including one reproducible to City. Two copies will be returned to Contractor. iii. Submittal for Final Distribution: Four copies to City.