Reso 2007-1103 - Laserfiche WebLink

Home Browse Search

I vlr� 0 N must not be the plant production manager nor report to or be the subordinate of the plant production manager. QC inspectors /technicians must be the employees of, and must report directly to the facility manager of QC. TABLE 105 -5 Experience Requirements for QC Inspectors /Technicians And Facility Manager for Quality Control Structural Steel Member Type Minimum Years of Experience Required QC Inspector /Technician Facility Manager for QC Rolled beam bridges 1 year 3 years Welded plate girders (12 y ears 4 ears y sections, box sections, etc.) Complex structures, such as trusses, arches, cable stayed3 years 5 years bridges, and moveable bridges Fracture critical (FC) members 3 years 15 years 110 REMOVAL OF EXISTING STRUCTURES. (REV 1 -3 -06) (FA 3 -8 -06) (7 -06) SUBARTICLE 110-6 (Pages 141 and 142) is deleted and the following substituted: 110 -6 Removal of Existing Structures. 110 -6.1 Structures to be Removed: Remove and dispose of the materials from existing structures. Remove the following: (1) those structures, or portions of structures, shown in the plans to be removed; (2) those structures, or portions of structures, found within the limits of the area to be cleared and grubbed, and directed by the Engineer to be removed; (3) those structures, or portion of structures, which are necessary to be removed in order to construct new structures; and (4) other appurtenances or obstructions which may be designated in the Contract Documents as to be included in an item of payment for the work under this Article. Notify the Florida Department of Environmental Protection (DEP) using DEP Form 62- 257.900(1) "Notice of Asbestos Renovation or Demolition" at least 10 working days prior to the demolition or renovation of any structures, even if asbestos is not found on the project. Provide a copy of this notice to the Engineer. 110 -6.2 Method of Removal: 110 -6.2.1 General: Remove the structures in such a way so as to leave no obstructions to any proposed new structures or to any waterways. Pull, cut off, or break off pilings to the requirements of the permit or other Contract Documents, whichever requires the deepest removal, but not less than 2 feet [0.6 m] below the finish ground line. In the event that the plans indicate channel excavation to be done by others, consider the finish ground line as the limits of such excavation. For materials which are to remain the property of the Department or are to be salvaged for use in temporary structures, avoid q r March 2007 01000 -28 03- 4122.D