Laserfiche WebLink
I <br />l <br />i <br />in <br />Type of <br />Type of Survey <br />Threshold <br />Remedial Work <br />Distress <br />Values <br />Rutting <br />Automated <br />N/A <br />N/A <br />Measurement <br />See Table 338 -1 <br />See Table 338 -1 <br />Rutting <br />Manual <br />Depth > 0.4 <br />Remove and replace 1.5 inch the full <br />Cracking <br />Measurement "' <br />inch <br />lane width for the area plus 50 feet with <br />feet for Cracks <br />rutting equal to or greater than 0.4 inch. <br />Cumulative <br />Surface <br />length o <br />Cracking <br />Any Survey <br />cracking > 300See <br />Table 338 -1 <br />Surface Deterioration: As used in Table 338 -3, Surface Deterioration includes Raveling <br />and /or Delamination affecting the Friction Course, Pot holes, Slippage Area(s), Segregated <br />feet for Cracks <br />> 1/8 inch <br />Surface <br />Deterioration 1 �1 <br />Any Survey <br />See Table 338 -1 <br />See Table 338 -1 <br />"' Rutting: Rut depth to be determined manually in accordance with the Flexible Pavement <br />Condition Survey Handbook, with readings taken at 20 foot spacing over the distressed <br />area. An area will be deficient when the average of three consecutive readings exceeds 0.4 <br />inch. <br />121 Surface Deterioration: As used in Table 338 -2, Surface Deterioration includes Raveling <br />and /or Delamination affecting the Friction Course, Pot holes, Slippage Area(s), Segregated <br />Area(s) and Bleeding; all as defined and footnoted in Table 338-1. <br />338 -5.4 Category 3 Pavement: For purposes of this Specification, "Category 3 <br />Pavement is defined as median crossovers and shoulders. <br />Threshold values and associated remedial work for Category 3 Value Added <br />Asphalt Pavement are specified in Table 338 -3. <br />TABLE 338 -3 <br />Category 3 Condition Survey <br />i <br />i <br />Type of <br />Type of Survey <br />Threshold <br />Remedial Work <br />Distress <br />Values <br />Rutting <br />N/A <br />N/A <br />N/A <br />Cumulative <br />length of <br />Cracking <br />Any Survey <br />cracking > 500 <br />See Table 338 -1 <br />feet for Cracks <br />> 1/8 inch <br />Surface <br />Deterioration 171 <br />Any Survey <br />See Table 338 -1 <br />See Table 338 -1 <br />Surface Deterioration: As used in Table 338 -3, Surface Deterioration includes Raveling <br />and /or Delamination affecting the Friction Course, Pot holes, Slippage Area(s), Segregated <br />Area(s) and Bleeding; all as defined and footnoted in Table 338-1. <br />338 -5.5 Remedial Work: During the warranty period, the Responsible Party will <br />perform all necessary remedial work described within this Section at no cost to the <br />Department. Should an impasse develop in any regard as to the need for remedial work or <br />i <br />March 2007 01000 -85 03- 4122.D w <br />