Laserfiche WebLink
<br />PREVIOUS CONTRACT NO. N/A <br /> <br />ATTACHMENT "A" <br /> <br />BID NO. Q-9-08-279-FF <br /> <br />SPECIFICATIONS AND REQUIREMENTS <br /> <br />PROVIDE & INSTALL PLAYGROUND SHADE STRUCTURES AT HERITAGE PARK <br />,tSHEL TERED MARKETl <br /> <br />ITEM <br /> <br />DESCRIPTION & SPECIFICATIONS <br /> <br />VENDORS SHOULD SHOW WHAT IS OFFERED INCLUDING ANY <br />DEVIATIONS FROM THE DESCRIPTION AND SPECIFICATIONS. THE <br />PRODUCT OFFERED BY THE BIDDER MUST ON AN OVERALL BASIS BE <br />EQUAL OR GREATER IN QUALITY OR PERFORMANCE THAN THE BID <br />SPECIFICATIONS. BROWARD COUNTY RESERVES THE RIGHT TO BE THE <br />SOLE JUDGE OF WHAT IS EQUAL AND ACCEPTABLE. BIDS WHICH DO <br />NOT COMPLY WITH THESE REQUIREMENTS ARE SUBJECT TO <br />REJECTION. <br /> <br />SCOPE <br />vendor needed to provide all labor, materials, equipment, services, incidentals, plans, engineering & permits required to <br />install one (1) 50' x 12' hexagon shaped shade structure for Plantation Heritage playground per specifications. <br /> <br />Item <br />No. DESCRIPTION <br /> <br />1. MATERIAL: <br /> <br />All materials are to be structurally sound and safe. Product <br />durability should be corrosion-resistant metals such as <br />stainless steel, and coatings such as zinc-plating, <br />galvanizing, and, and powder-coating on steel parts. Fabrics <br />used shall include UV-stabilizers and be fire retardant for <br />longevity and safety. <br /> <br />2. WELD: <br /> <br />2.1 All tubings are to be factory-welded by Certified <br />Welders to American Welding Society (AWS) <br />specifications. Welds are to be finished with a zinc- <br />rich galvanized coating. <br /> <br />2.2 Posts, Structural Frame Tubing, and hardware: <br />All tubing used shall be cold-formed and milled per <br />ASTM A-135 and ASTM A - 500, or equal. Minimum <br />yield is to be 40,000 psi with a minimum tensile <br />strength of 45,000 psi on all posts. All tubing shall be <br />pre-cut to appropriate lengths. All outside surfaces <br />shall be galvanized, with an interior surface corrosion- <br />resistant zinc-rich coating, or equal. All fastening <br />hardware shall be stainless steel. <br /> <br />COMPLY? <br />YES NO <br /> <br />EXCEPTIONS <br /> <br />a/ <br /> <br />(] <br /> <br />~ <br /> <br />(] <br /> <br />w/ <br /> <br />(] <br /> <br />PSS-PB09-2008 <br />10114108 <br /> <br />.' <br /> <br />Page 20 of 34 <br />