Horsepower Electric #1 - Laserfiche WebLink

Home Browse Search

I I I I I I I I I I I I I I I I I I I 07/04 deterioration with impervious sheet coverings, provide adequate ventilation to avoid condensation. 4. Store loose granular materials in a well-drained area on solid surfaces to prevent mixing with foreign matter. C. All materials and equipment to be incorporated in the work shall be handled and stored by the Contractor before, during, and after shipment in a manner to prevent warping, twisting, bending, breaking, chipping, rusting, and any injury, theft or damage of any kind whatsoever to the material or equipment. D. Cement, sand, and lime shall be stored under a roof and off the ground and shall be kept completely dry at all times. All structural and miscellaneous steel, and reinforcing steel shall be stored off the ground or otherwise to prevent accumulations of dirt or grease, and to minimize rusting. Brick, block and similar masonry products shall be handled and stored in a manner to reduce breakage, chipping, cracking, and spalling to a minimum. E. Moving parts shall be rotated a minimum of once weekly to insure proper lubrications and to avoid metal-to-metal"welding". Upon installation of the equipment, the Contractor shall start the equipment, at least half load, once weekly for an adequate period of time to insure that the equipment does not deteriorate from lack of use. F. All materials which, in the opinion of the Engineer, have become so damaged as to be unfit for the use intended or specified shall be promptly removed from the site of the work, and the Contractor shall receive no compensation for the damaged material or its removal. G. Arrange storage in a manner to provide easy access for inspection. Make periodic inspections of stored Products to assure that Products are maintained under specific conditions, and free from damage or deterioration. H. Provide substantial coverings as necessary to protect installed products from damage from traffic and subsequent construction operations. Remove covering when no longer needed. I. The Contractor shall be responsible for all materials, equipment, and supplies sold and delivered to the Owner under this Contract until final inspection of the work and acceptance thereof by the Owner. In the event any such material, equipment, and supplies are lost, stolen, damaged, or destroyed prior to final inspection and acceptance, the Contractor shall replace same without additional cost to the Owner. J. Should the Contractor fail to take proper action on storage and handling of equipment supplied under this Contract within seven days after written notice to do so has been given, the Owner retains the right to correct all 01600-4 03-4174