Laserfiche WebLink
<br />Copyright 2002 AIA <br /> <br />MASTERSPEC Full Length <br /> <br />11/02 (R 05/06) <br /> <br />B. Chain-Link Fencing: Minimum 2-inch (50-1illn), 0.148-inch- (3.76-mm-) thick, galvanized <br />steel, chain-link fabric fencing; minimum 6 feet (1.8 m) high with galvanized steel pipe posts; <br />minimum 2-3/8-inch- (60-mm-) OD line posts and 2-7/8-inch- (73-111m-) OD corner and pull <br />posts[, with 1-5/8-inch- (42-111111-) aD top rails, with galvanized barbed-wire top strand. <br /> <br />C. Portable Chain-Link Fencing: Minimum 2-inch (50-mm), 9-gage, galvanized steel, chain-link <br />fabric fencing; minimum 6 feet (1.8 m) high with galvanized steel pipe posts; minimum 2-3/8- <br />inch- (60-mm-) OD line posts and 2-7/8-inch- (73-mm-) aD corner and pull posts, with 1-5/8- <br />inch- (42-mm-) OD top and bottom rails. Provide galvanized steel bases for supporting posts. <br /> <br />D. Wood Enclosure Fence: Plywood, [6 feet (1.8 111)] [8 feet (2.4 m)] high, framed with four 2-by- <br />4-inch (50-hy-1 OO-mm) rails, with preservative-treated wood posts spaced not more than 8 feet <br />(2.4 m) apart. <br /> <br />E. Lumber and Plywood: Comply with requirements in Division 6 Section. <br /> <br />F. Gypsum Board: Minimum 1/2 inch (12.7 mm) thick by 48 inches (1219 111m) wide by <br />maximum available lengths; regular-type panels with tapered edges. Comply with <br />ASTM C 36/C 36M. <br /> <br />G. Insulation: Unfaced mineral-fiber blanket, manufactured from glass, slag wool, or rock wool; <br />with maximum flame-spread and smoke-developed indexes of 25 and 50, respectively. <br /> <br />H. Paint: Comply with requirements in Division 9 painting Sections. <br /> <br />2.2 TEMPORARY FACILITIES <br /> <br />A. Field Offices, General: Prefabricated or mobile units with serviceable finishes, temperature <br />controls, and foundations adequate for normal loading. <br /> <br />B. Common-Use Field Office: Of sufficient size to accommodate needs of construction personnel. <br />Keep office clean and orderly. Furnish and equip offices as follows: <br /> <br />1. Furniture required for Project-site documents including file cabinets, plan tables, plan <br />racks, and bookcases. <br />2. Conference room of sufficient size to accommodate meetings of [10] <Insert number> <br />individuals. Provide electrical power service and 120-V ac duplex receptacles, with not <br />less than 1 receptacle on each wall. Furnish room with conference table, chairs, and 4- <br />foot- (l.2-m-) square tack board. <br />3. Drinking water and private toilet. <br />4. Coffee machine and supplies. <br />5. Heating and cooling equipment necessary to maintain a uniform indoor temperature of 68 <br />to 72 deg F (20 to 22 deg C). <br />6. Lighting fixtures capable of maintaining average illumination of 20 fe (215 Ix) at desk <br />height. <br /> <br />C. Storage and Fabrication Sheds: Provide sheds sized, furnished, and equipped to accommodate <br />materials and equipment for construction operations. <br /> <br />1. Store combustible materials apart from building. <br /> <br />TEMPORARY FACILITIES AND CONTROLS <br /> <br />01500 - 3 <br />