Laserfiche WebLink
Company vehicles are to be used only by approved company drivers. No riders or non-employee <br />passengers are permitted. The company vehicle is to be used exclusively for company business -- <br />no personal use is permitted. <br />As the driver you are responsible for all co-workers. All seat belts must be worn at all times. <br />Report mechanical problems to your.supervisor immediately. Do not operate a vehicle that is <br />unsafe. <br />Report all accidents and traffic infractions to your supervisor. <br />Anyone operating a company vehicle while under the influence of alcohol or a controlled <br />substance will be terminated. <br />Shut off engine, set brakes, and block wheels when parked, before loading or unloading vehicles, <br />and before beginning on-site work. This includes trucks, equipment, and aerial lift devices. <br />Any vehicle found to be defective shall be removed from service until properly repaired. <br />All. vehicles and equipment shall be operated in accordance with the manufacturer's <br />recommendations. Outriggers and wheel chocks shall be in place before operating vehicle - <br />mounted equipment. Brakes shall be properly set. <br />In the event of traffic around the work site, proper traffic control procedures will be in effect. <br />Vehicle post -trip inspections/reporting <br />Using the inspection report form <br />Pre -Trip Inspection: Review the last Post -Trip Inspection Report to determine if defects or <br />deficiencies were reported by prior driver(s). If defects were reported, be sure necessary repairs <br />have been made and the person responsible for making the repairs has signed and dated the report <br />in the space (maintenance action) provided. Sign and date in the space provided for "Reviewing <br />driver" to acknowledge that the report was reviewed and defects, if any, were corrected. <br />Post -Trip Inspection: <br />1. Enter truck number, current mileage and other applicable information in the space provided at <br />top. Press hard, there are two copies. Also enter chipper or other towed equipment number, if <br />applicable, in the space provided. <br />2. Complete the inspection at completion of the day's work. Check appropriate box(s) to indicate <br />defect(s). If you find a defect that is not listed, enter it in comment section. <br />3. If no defects are noted, check NO DEFECTS. <br />4. Sign and date in space provided to certify inspection. <br />5. Remove the office copy and distribute as instructed. <br />6. The truck copy of the inspection report must be carried on the truck at all times. <br />16 <br />