Laserfiche WebLink
SAMSON OCEANFRONT PARK <br />CITY OF SUNNY ISLES <br />TECHNICAL SPECIFICATIONS <br />ELECTRICAL IDENTIFICATION 16075 - 2 <br />1. Not less than 6 inches wide by 4 mils thick. <br />2. Compounded for permanent direct-burial service. <br />3. Embedded continuous metallic strip or core. <br />4. Printed legend indicating type of underground line. <br /> <br />F. Tape Markers: Vinyl or vinyl-cloth, self-adhesive, wraparound type with preprinted numbers <br />and letters. <br /> <br />G. Aluminum, Wraparound Marker Bands: Bands cut from 0.014-inch- thick aluminum <br /> sheet, with stamped or embossed legend, and fitted with slots or ears for permanently se <br /> curing around wire or cable jacket or around groups of conductors. <br /> <br />H. Plasticized Card-Stock Tags: Vinyl cloth with preprinted and field-printed legends. <br /> Orange background, unless otherwise indicated, with eyelet for fastener. <br /> <br />I. Aluminum-Faced, Card-Stock Tags: Weather-resistant, 18-point minimum card stock <br /> faced on both sides with embossable aluminum sheet, 0.002 inch thick, laminated with <br /> moisture-resistant acrylic adhesive, punched for fasteners, and preprinted with legends to <br /> suit each application. <br /> <br />J. Brass or Aluminum Tags: 2 by 2 by 0.05-inch metal tags with stamped legend, punched <br /> for fastener. <br /> <br />2.2 <br /> <br />NAMEPLATES AND SIGNS <br />A. Safety Signs: Comply with 29 CFR, Chapter XVII, Part 1910.145. <br /> <br />B. Engraved Plastic Nameplates and Signs: Engraving stock, melamine plastic laminate, <br /> minimum 1/16 inch thick for signs up to 20 sq. in. and 1/8 inch thick for larger sizes. <br />1. Engraved legend with black letters on white face. <br />2. Punched or drilled for mechanical fasteners. <br /> <br />C. Baked-Enamel Signs for Interior Use: Preprinted aluminum signs, punched or drilled for <br /> fasteners, with colors, legend, and size required for the application. 1/4-inchgrommets in <br /> corners for mounting. <br /> <br />D. Exterior, Metal-Backed, Butyrate Signs: Weather-resistant, nonfading, preprinted, <br /> cellulose-acetate butyrate signs with 0.0396-inch galvanized-steel backing; and with <br /> colors, legend, and size required for the application. 1/4-inch grommets in corners for <br /> mounting. <br /> <br />E. Fasteners for Nameplates and Signs: Self-tapping, stainless-steel screws or No. 10/32, <br /> stainless-steel machine screws with nuts and flat and lock washers. <br /> <br />2.3 <br />A. Cable Ties: Fungus-inert, self-extinguishing, one-piece, self-locking, Type 6/6 nylon ca- <br />ble ties. <br />MISCELLANEOUS IDENTIFICATION PRODUCTS <br />1. Minimum Width: 3/16 inch. <br />2. Tensile Strength: 50 lb minimum. <br />3. Temperature Range: Minus 40 to plus 185 deg F. <br />4. Color: According to color-coding.