Add No 3 - Laserfiche WebLink

Home Browse Search

2 Base bid Concrete Repairs Vertical Surfaces Beams, parapets, walls, columns Cast in place concrete on building exterior and garage interiors shall be inspected for cracking and spalling and repaired nte 6 inches deep includes rebar, repair , priming, patch of concrete, Sika materials or equivalent for crack filling, concrete restoration. Bonding, priming of rebar NTE 75 lf of concrete repair included 3 Base bid Concrete repairs horizontal Surfaces Slabs, concrete driving surfaces Shall be repaired including applying low viscosity epoxy filler to crack in parking garage 2nd floor coming up to third floor NTE 200 LF of crack to be filled Sika or equivalent included 4 Base bid Stucco and finish repairs Contractor is required to provide “sounding of Stucco” in areas of known delamination and mark areas for repair or removal and replacement. Owner’s staff or designee shall provide field review of areas to determine total area and scope of repairs using unit prices and allowances provided as part of bid attached here-to NTE 350 SF of delaminating stucco removal and repair included 5 Base bid Precast vertical panel stains Contractor is to repair stains or “burn-outs” on pre-cast panels caused by isolated surface contaminants located on vertical surfaces throughout Office building. Contaminants are thought to be on surface or within 1/4inch deep or less. The owner may request petrological analysis to determine the underlying cause of stains. Contractor shall remove stains by chemical treatment, grinding or other appropriate method, patch as maybe required. If underlying metal structure is exposed it shall be cleaned of all rust and treated with appropriate primer and the concrete repaired NTE 25 locations of stain repair included 6 Base bid Stainless steel stair rail replacement Remove and replace existing stainless steel stair rails on east end of building in vicinity of fountain, with an architecturally similar stainless rail , repair damaged precast concrete stair, pressure clean and seal concrete with clear sealer. Reuse existing embedment for attachment if possible or core precast stair and install posts with compatible grout. Rails and posts to be Type 316 brushed #4 satin finish. Hardware and fasteners are to be of compatible material suitable for marine exposure. Include repair of concrete in area of railing replacement NTE 3- 6 inch square areas. Signed and sealed shop drawings shall be provided and permit obtained if required. included